Module：SIOL-M12A-16SAP/EX

IO-Link Hub

SIOL-M12A-16SAP/EX is an IO-Link Hub designed for flexible field-level I/O expansion in industrial automation systems. It connects multiple digital input and output signals through one IO-Link interface, helping users simplify wiring, reduce cabinet space, and integrate sensors and actuators more efficiently in distributed machine installations.

Contact for pricing

Full Technical Specification

Specification

Value

Supply voltage

24VDC ± 10%

Operating current

<100mA

Working and load power supply

≤ 4A(UI Ub); Note: IO-Link Master provides power, Master parameters must be considered

Input

Number of channels

16(C0-C7)

Interface type

M12, 5-pin

Input type

PNP or NPN(Depends on the model)

Input impedance

3K

Input rated current

7mA

Input delay

3ms

Switch threshold

2mA/4mA 7V/11V

Electrical isolation mode

Optocoupler isolation

Sensor power supply

Maximum 150mA; C0...C3 Total currentmax1.2 A; C4...C7 Total currentmax1.2 A; The total CO-C7 current is limited to the maximum current of the Master port

Output

Number of channels

16(C0-C7)

Output type

PNP or NPN(Depends on the model)

Output current

0.2A;Max.0.5A;(Total maxcurrent<4A)

Output protection

Overload protection, overheating protection

Output protection reaction time

Approximately 20ms

Switching frequency

100HZ

Output voltage drop

0.6V

Electrical Isolation mode

Optocoupler isolation

IO-Link

Process data

6 bytes input,4 bytes output

Vendor ID

1317(0x0525)

Device ID

66148 (0x010264)

Number of ports

2 IO-Link port type

Class A

IO-Link specification

V1.1

Frame type

TYPE_2_V

Transmission rate

COM3 230.4 kbit/s

Minimum cycle time

3200us

ISDU

Supported

Block parameter operation

Not support

Data storage (DS) / Data storage lock

Supported

Operating temperature

-20-55℃

Product Features &Benefits

SENTINEL IO-Link Hubs are designed to collect field-level digital signals and connect them to the control system through a single IO-Link connection. They help simplify sensor and actuator wiring, support distributed installation close to the machine, and make I/O expansion more flexible for modern automation equipment.